Realogic Posted November 15, 2011 Report Share Posted November 15, 2011 Hi, I noticed a very big problem on my SnomOne Yellow. Due to bandwith problem, my customer need to use g729. Carried with Yellow version, just 5 concurrent calls are allowed. This is ok.. but it's a lack of features when you can't buy these as single product. Anyway, the problem is this: If I set a trunk with G729 and one more (like GSM, for example) I expect that when 5 calls are reached, PBX will use the GSM! But it doesn't! It just drop my call. This is a very big hole for g729 users. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted November 15, 2011 Report Share Posted November 15, 2011 We are also not happy with the way the G.729A codec has to be licensed. The call-based license model comes from a world where large hardware boxes were using DSP to perform the codec calculations.In the SIP world, the call can re-negotiate the codec at any time; so even if you first negotiated G.711 you still might end up using G.729A. Anyway, this problem is addressed in the next major release (AKA 5.0). There we have a more dynamic look on which codecs are actually used and if they are in use, we dont offer them any more. Quote Link to comment Share on other sites More sharing options...
Steve B Posted November 15, 2011 Report Share Posted November 15, 2011 Is 5.0 still looking like 2013 or will it be sooner? Quote Link to comment Share on other sites More sharing options...
pbx support Posted November 15, 2011 Report Share Posted November 15, 2011 We should be releasing the beta soon (week or 2) Quote Link to comment Share on other sites More sharing options...
Steve B Posted November 15, 2011 Report Share Posted November 15, 2011 We should be releasing the beta soon (week or 2) Awesome!! I would love to put it on a test machine here. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.