Travis Posted May 14, 2012 Report Share Posted May 14, 2012 Is there a way to temporarily disable the firewall on the soho? I'm running version 4.5.0.1024, but I'm assuming you have to alter any firewall settings through the SoHo's OS. Quote Link to comment Share on other sites More sharing options...
Vodia support Posted May 15, 2012 Report Share Posted May 15, 2012 I believe the soho firewall is disable by default. Check our access list feature should offer you protection from friendly scanners and DOS attacks. http://wiki.snomone.com/index.php?title=Common_Security_Measures_in_snom_ONE_Installations Quote Link to comment Share on other sites More sharing options...
pbx support Posted May 15, 2012 Report Share Posted May 15, 2012 If you are referring to OS firewall, then you can use the standard Linux(Debian) commands to disable the firewall. http://wiki.debian.org/DebianFirewall Quote Link to comment Share on other sites More sharing options...
Travis Posted May 15, 2012 Author Report Share Posted May 15, 2012 If you are referring to OS firewall, then you can use the standard Linux(Debian) commands to disable the firewall. http://wiki.debian.org/DebianFirewall Debian does not have a persistent iptables file. I logged in via ssh and it is not there. Quote Link to comment Share on other sites More sharing options...
Travis Posted May 15, 2012 Author Report Share Posted May 15, 2012 The reason I'm asking is that my vega gateway is sending sip requests to the soho but the soho is not responding and on the vpn router I am using i've opened all the ports that are required by both systems. the BYE is getting through, but the 200 OK is not. The pbx is getting through to the vega though, when I dial out the status light lights up and it tries to send traffic, but it seems like the pbx won't respond to the vega's requests. Quote Link to comment Share on other sites More sharing options...
Vodia PBX Posted May 15, 2012 Report Share Posted May 15, 2012 Well, after all the SoHo is a complete Debian system. Not being the big experts here, but I guess you can add a file to /etc/network/rc-up.d which gets executed when your interface comes up. If there is a iptables or route command that solves your problem, you probably can just put it there. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.