Jump to content

SnomONE v.5 PnP issues


sudo
 Share

Recommended Posts

Are these instructions still good for ver 5? http://wiki.snomone.com/index.php?title=Plug_and_Play#PNP_Firmware

 

Ive got a snom360 that wont connect using the above instructions.

 

Is there an article for all the changes that need to be accounted for? For instance, apparently Polycoms use the mac address instead of the extension number.

 

Are all of these little changes documented or do I get to find them as I go? Its been frustrating working with ver 5. Seems like a lot has changed and I was just getting used to 4.5 :huh:

 

Any help is appreciated.

Link to comment
Share on other sites

Are these instructions still good for ver 5? http://wiki.snomone.com/index.php?title=Plug_and_Play#PNP_Firmware

 

Ive got a snom360 that wont connect using the above instructions.

 

Is there an article for all the changes that need to be accounted for? For instance, apparently Polycoms use the mac address instead of the extension number.

 

Are all of these little changes documented or do I get to find them as I go? Its been frustrating working with ver 5. Seems like a lot has changed and I was just getting used to 4.5 :huh:

 

Any help is appreciated.

 

Try 5.08. And see if you have the same issue

Link to comment
Share on other sites

There is a problem when you use a PnP URL like this: http://pbx-adr/prov/snom360.htm. Then the PBX translates that into something like this: http://pbx-adr/prov/prov/snom360-000413123456.htm (double prov). The problem will be fixed in 5.0.10. In the meantime either use http://pbx-adr/snom360.htm, http://pbx-adr/snom360-000413123456.htm or just http://pbx-adr.

Link to comment
Share on other sites

Are these instructions still good for ver 5? http://wiki.snomone.com/index.php?title=Plug_and_Play#PNP_Firmware

 

Ive got a snom360 that wont connect using the above instructions.

 

Is there an article for all the changes that need to be accounted for? For instance, apparently Polycoms use the mac address instead of the extension number.

 

Are all of these little changes documented or do I get to find them as I go? Its been frustrating working with ver 5. Seems like a lot has changed and I was just getting used to 4.5 :huh:

 

Any help is appreciated.

 

 

Maybe try 5.09 and follow this article

 

http://wiki.snomone.com/index.php?title=Provisioning_3xx_series_phones, for the snom phones I am using 8.4.35

Link to comment
Share on other sites

There is a problem when you use a PnP URL like this: http://pbx-adr/prov/snom360.htm. Then the PBX translates that into something like this: http://pbx-adr/prov/prov/snom360-000413123456.htm (double prov). The problem will be fixed in 5.0.10. In the meantime either use http://pbx-adr/snom360.htm, http://pbx-adr/snom360-000413123456.htm or just http://pbx-adr.

 

I tried all of the above with no success. Im beginning to wonder how I got this to provision in the first place.

 

Im going to update to version 5.0.10 and see what happens.

Link to comment
Share on other sites

The issue has been found.

 

Even though the WebUI listed the https port open, iptables did not have a corresponding rule.

 

These PnP requests were timing out.

 

I manually opened port 443 in the iptables and PnP is working again.

 

I was having the same issue with RTP. The WebUI listed a range of ports, but iptables did not reflect this.

 

Im not sure why the WebUI is not updating iptables correctly.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

×
×
  • Create New...