[More than one phone.]

will also all those phones ring if i enable call cellphone in a hunt group?

[max messges 0 / mailbox full message]

why not use a IVR Node or a Auto Attendant? it will play the greeting then terminate the call if you set it up the right way

[call hold, phone doesn't ring on next call]

What model phone and what version?

[System Status Page - Email status]

so only if it’s a failure except for the "email event notification address"

or if not an email. maybe a clue of what email address was causing the issue, and what email was being sent

erasing the email is fine so the PBX doesn’t keep trying all day to send 20 emails that have issues, but if I don’t know what email address is causing it, I will never figure out how to correct the problem

[set up a sip trunk]

I was able to create an extension and have the other PBX register as an extension and make calls

but was wondering if it’s actually possible to set up a "gateway" between the 2 instead of via extension

 

the person trying to make calls on our PBX is able to register their device (which is actually a call blaster product)

but they also want to test a "sip peer", is it possible?

[Failover Setup]

Reading the "wiki" page it says:

DNS Setup

We recommend using DNS names to identify the service. This makes it easier to move domains or the whole server to a different location. There is a global flag called "provision_domain_name" which makes it possible to provision the DNS name of the domain instead of the IP address of the system (if set to "true").

 

does that mean the phone will use the domain name and not the IP address? for the server address?

 

also if I just recently changed the global setting, will all phones automatically get the new info when it registers next time? or only when it provisions using HTTP?

[System Status Page - Email status]

I would like to request the ability to receive an email notification if a email doesn’t go thru because that email address doesn’t exist etc

I go into the spool when I get into the office in the morning and the folder doesn’t contain the email that was unsuccessful, it’s a problem since I can’t drill down the issue

[set up a sip trunk]

again what I want to do is the following

I have another PBX that I want to provide it the ability to make calls

so I want know if I can set up a trunk with a set of username / password and ill have the other PBX Register to mine

is it possible?

[No Beep on Voicemail]

im sorry it is the audio_moh file

i have also attached it here in case you dont have it

mb_beep.wav

[set up a sip trunk]

your saying i need to set up a sip gateway on my end?

and i give him the user name and password i put in there?

and i give that to him and he will be able to register to me?

[No Beep on Voicemail]

you are missing the audio_en files

[set up a sip trunk]

Thats how it is, when it comes to my own i cant figure it out

 

what exactly do i need to do?

[Call Waiting on Polycom 550]

whats the latest firmware? 3.1.3?

[set up a sip trunk]

my friend has a PBX at home and want to use our PBX to terminate his call

how do i set up that he can register to my PBX and not as an extension, but as a sip peer

[System Status Page - Email status]

how long does a unsuccesfull sent email stay in the spool directory?

[Definition Of "Intercom"]

and to test it

you will need to set the permission on each extension which extension it is allowed to intercom

[Auto provision for Linksys SPA942]

it does not work in a hosted set up

is there any way to get this working even for hosted solutions? were not registering the phones on the same network the PBX is on

[Unknown DID Call Treatment]

how about in a multi domain solution?

it would be nice to set up that if the incoming DID is not added to an account on a domain, then it should play the you’ve reach a number that’s not in service at xxx. please check the number and dial again, thank you, this is a recording.

[Dialer]

has anyone ever made a list of the pro's and con's of each product?

[Format outgoing number?]

I normally see having the correct country code on the domain level, then on the trunk set the appropriate rewrite global number to your correct needs will be better when placing calls so you don’t have to put down the country code when making a call

[Where do I find/configure service flags?]

If you rlooking WHERE to set up the service flag? go to ADMIN / pick the right DOMAIN you want to manage / click on ACOUNT / now click on CREATE / now from the Account type drop down list choose Service Flag - there you have it, BAM!

[Wireshark]

worked when I enter it in once have it running and I just want to filter

but if I set it into the capture filter then it won’t work

[Wireshark]

sip.r-uri.user==9787897899 doesnt work

[Wireshark]

Is it possible to run wireshark and ONLY monitor a certain number that’s being dialed?

it will help if I know I have a problem with dialing a certain phone number, I only want to monitor the information related to making that phone call

[My ideal Agent Group]

to include cell phones will be in version 4.0 (option to include cell phone number of extension if its added to a hunt groups and another option to include cell phones in agent groups)

 

a temporarily / dirty workaround now is to create an extension and under registration in the bottom by add contact add the following

sip:CellNumber@IPAddressOfTrunkOrSignallingSwitch;user=phone

 

for example: sip:19789781234@74.74.74.74;user=phone

 

now add that extension to the agent group (or in your case after 30 seconds it should include or ring that extension) and anytime that extensions rings, it will ring that cell number

the problem is that if the cell phones voice mail picks up, the PBX will assume the call is connected and the caller will be connected to that voice mail box

which in my eyes isn’t professional