Jump to content

Pradeep

Members
  • Posts

    70
  • Joined

  • Last visited

Everything posted by Pradeep

  1. Working on it. We had some upgrade issue sometime back. I guess fixing that caused this issue.
  2. Seems like there is some issue with the post install script. I will take a look at it. Meanwhile, could you please make a backup of your pbx working directory (you can find the working directory location by going to Admin->Status page), remove the old installation manually and then reinstall the desired version?.
  3. 3.1 is ready for the testing. Please take a look at the posting http://forum.pbxnsip.com/index.php?showtopic=1650 You can create trunks and dialplan entries to achieve this. http://wiki.pbxnsip.com/index.php/Dial_Plan http://wiki.pbxnsip.com/index.php/Trunk_Settings
  4. Currently we do have basic support for the CSTA. Please check out http://wiki.pbxnsip.com/index.php/CSTA
  5. It is not forgotten. Currently, we support only Intel based CPUs
  6. Can you try changing the "Ringback" trunk setting (at the bottom of the trunk edit page) and see that changes the behavior that you are looking for? May be the VoIP provider is ignoring the '183 Media'.
  7. You can add another dial plan 1xxx-xxx-xxxx to 91xxx-xxx-xxxx
  8. Please take a look at Microsoft Exchage UM http://wiki.pbxnsip.com/index.php/Microsoft_Exchange. It talks about the field that you are interested in.
  9. What kind of call logging are you thinking? I am not sure what is missing by having IP interface over the serial feed.
  10. If the call has to go to the mailbox always, you can set the "Call Forward all calls to" 8<ext>, where <ext> is the extension number. This setting is available under the "Redirection" tab for the extension.
  11. Generally, if you can prefix '8' in front of the extension, then it sends directly to the voicemail box of the extension
  12. Could you please tell us what is the software version? Since you can ssh, can you check the available disk space?
  13. Could you please send the call log starting from INVITE? That way we can see the complete details. BTW, you can increase the logging by using Admin->Settings->Logging page and setting "Log Other Messages" to "Yes" and increase the log level to 7 or above
  14. You can set the "Accept Redirect" on the trunk and call should go through
  15. From the pbxnsip side all you need is to create a trunk that points to the speech server address, dialplan that uses this trunk and assign the dialplan to the account(x-lite extension). On how to create the trunk and the dial plan check out these links http://wiki.pbxnsip.com/index.php/Trunk_Settings http://wiki.pbxnsip.com/index.php/Dial_Plan After the configuration, dial the number that you specified on dialplan and that should send the call to speech server.
  16. have you checked out the forum entries in section http://forum.pbxnsip.com/index.php?showforum=62 ?
  17. Make sure that you have copied the 'Win32 update' not the installer. You can also, try to run the new installer first and the perform the manual upgrade process.
  18. ANI field is available both on the trunk and the extension level. (Note: on the trunk page look for "Trunk DID", if you are using the official 3.1 version)
  19. I have not worked on Windows 2008 server. But I assume that it has the "Search" option when you click on the "windows/start" button on the bottom left corner. You can type in "Phone and Modem Options" and windows will search it for you.
  20. Can you please verify the "recordings" folder under the pbx install directory? If the file is generated there, then there must be some issues in sending emails.
  21. Looks like PBX received the NOTIFY without the address filled in.
  22. Here it is www.pbxnsip.com/download/pbxctrl-rhes4-3.0.1.3023
  23. This is harmless. Just some debug info, will be removed soon.
×
×
  • Create New...