Vodia support

HI 911 did you configure the trunks yet?

it may need a fresh firmware install to get those phones going.

Hi, what type of tftp serve?r Pumpking, tft32?

: Hey Matt check http into the m3 server for some clues. there should be some logs there.

no it does not support pnp, I configure the phones in my lab, they are pretty easy to use, all done on the web portal server. when you register a kirk it will send out a signal with it registration number, then this number will be display on the web portal you will configure the extension there.

Hi Guys we have tested the polycom Kirk phone with the pbxnisip, very reliable and easy to set up here is a link to there product. http://www.polycom.com/products/voice/wire...20_handset.html

open a ticket at the support site. so I can take a look at it Hamlet Collado pbxnsip support

Good Post will Experiment with this.

Santiago is your Cs410 in Warranty?

Here is a similar post that might help you. http://forum.pbxnsip.com/index.php?showtop...art=#entry13274

can you set the logfile to 7 so we can see more information. also set the log sip events on

What type of pbx does your friend have?

Hi Jose I was wondering if the cell redirection worked?

Can we have access to your web portal?

Multicast for snom phone create a paging account on the destination add 224.1.2.3:12345 this is just a random port I used save the changes. on the snom phone go to advance /RTP 1 Scroll down to Mulricast 2 add the multicast range 224.1.2.3:12345 so the phones will listen. This has to be done on all the phones but its also by preference. reboot snom phone press feature code *90 and should page phones associated with the above ip. In 3.4, please check the Extension's "Permissions" tab/page. We have added some controls over there. Also, if you have multiple registrations, then the intercom is not support.

http://wiki.pbxnsip.com/index.php/Paging

is Vista Compatible with pbx software?

Hello, Trying to intall PBX on vista. My Vista Platform says that its 32 bit os any clues?

Hello, Trying to intall PBX on vista. My Vista Platform says that its 32 bit os any clues?

thanks Matt will look into the trunk to set up outbbound call,will post soon.

great, i checked my voice mail and set it up, know to my understanding u can only make calls with users,using xlite? and one more question when i downloaded a pbx software, i couldn't see the pbx soft phone on my windows xp any suggestion thank u again 4 replying

#2 the pbxsip is install on my windows but i don't have the software show up in my programs has a standalone application the soft phone is the only thing visible. #3 not sure how to ping unless through a tutorial. #4 has far as the extension is concern i followed instruction on callcentric.com that lead me to create an extension withing the pbx admin site. #5 i just dial 840 and i did get the voice prompt I was trying to make an outside call but, must i dial the whole number or go to pbx admin and add a short cut for the whole number? Thanks Matt

HI YA'LL so this is the link to start http://wiki.pbxnsip.com/index.php/Setup_the_free_demo_system know I followed the steps as describe Once the phone is registered and the trunk is registered (200 OK in status screen) will be stated in the pbx interface, now, when i try to make a call on the soft phone, it says the call failed, it also says user does not exist, know i followed the call centric tutorial on how to set the pbx extension and trunks, why am i getting this error? I am nooob so can anyone light sum light hrr.